L3Harris XG-75 • Tactical Audio Hub
MSM — L3Harris 15-Pin UDC (HA1)
Modular Speaker Mic for L3Harris P-series and XG-series radios using the legacy 15-pin Universal Device Connector (UDC). Emergency button and high/low volume control are active through the 15-pin interface. The NATO-wired amplified Nexus port bridges these radios to modern tactical headset systems.
How It Works
☑ Patrol Mode
Use as a standard speaker mic. Clip to shoulder strap or vest. Omni-directional microphone captures voice from any angle — no need to lean into the mic.
☑ Tactical Mode
Plug a headset into the Nexus port. Speaker auto-mutes. Audio routes to your ears. The MSM becomes your PTT — press front or side button to transmit through the headset mic.
Key Features
-
Dual-Role Operation: Use as a standalone speaker mic for daily patrol. Plug a headset into the Nexus port and the MSM becomes a PTT — speaker auto-mutes, audio routes to your ears. One device, two modes.
-
Dual PTT: Oversized front button for quick keying plus a secondary side button — both work with gloved hands.
-
Emergency Button: Dedicated bright-orange emergency activation button. Sends the radio's programmed emergency alert when pressed.
-
Volume Control: Up/down scroll buttons on the speaker mic body — adjust audio without reaching for the radio.
-
Amplified Nexus Port: NATO-wired Nexus connector with built-in amplification for low-impedance dynamic headsets — Ops-Core AMP, 3M Peltor ComTac, MSA Sordin, David Clark, and other tactical headsets with U-174/U plug. Speaker auto-mutes when headset is connected.
-
IP67 Sealed: Dust-tight and submersible to 1 meter for 30 minutes. Built for rain, mud, and standing water.
Radio-Specific Notes
The 15-pin UDC is the legacy L3Harris connector found on the XG-75 and P-series platforms. If you have a newer L3Harris radio with the 9-pin UDC (XL-200, XL-185, XG-100P/Unity), use the HA2 variant instead.
Compatible Radios
L3Harris (M/A-Com) XG-15P, XG-25P, XG-75P, P5300, P5400, P5500, P7300, P7400, PD7100.
Headset Compatibility
The amplified Nexus port is designed for headsets with dynamic (low-impedance) microphones:
- ✓ Ops-Core AMP (via U174 Monaural or Monobinaural Downlead)
- ✓ 3M Peltor ComTac V/VI, SWAT-Tac
- ✓ MSA Sordin Supreme Pro-X (Mil-Spec)
- ✓ David Clark H10-76 series
- ✓ Any NATO-wired headset with U-174/U plug and dynamic microphone
Electret microphone headsets are not supported by this amplified variant. Contact us for electret-compatible custom orders.
Need a PTT Without a Speaker Mic?
The MSM is built for operators who need both modes — speaker mic on patrol, headset PTT on operations. If you run a tactical headset full-time and don’t need a speaker mic at all, the Constant Able is a lighter, simpler, purpose-built PTT.
Constant Able PTTs connect directly to your radio with no speaker mic in the chain. Auto-switching impedance detection handles both dynamic and electret headsets automatically — broader headset compatibility than the MSM’s dynamic-only Nexus port. Available for Motorola APX, Motorola XTS, Kenwood, L3Harris, Hytera, Icom, Baofeng, and NATO 6-pin radios.
Specifications
| Spec |
Value |
| Radio Connector |
L3Harris 15-Pin UDC |
| Headset Port |
Nexus (U-174/U) — NATO wired (Amplified) |
| Earpiece Port |
3.5 mm listen-only |
| Microphone |
Omni-directional, −42 dB ±3 dB |
| Speaker |
36 mm dynamic, 1 W (1.5 W max), 91 dB ±3 dB |
| PTT |
Dual — oversized front + secondary side |
| Emergency |
Dedicated button (bright orange) |
| Volume |
Up / Down scroll control |
| IP Rating |
IP67 (dust-tight, 1 m submersion / 30 min) |
| Cable |
Kevlar-reinforced coil cord, 50,000 flex cycles, 13 kg pull strength |
| Temp Range |
−25°C to +60°C operating |
| Frequency Range |
580 Hz – 5 KHz |
| PTT Switch Life |
100,000 cycles |
| DISCO32 SKU |
MSM-50-HA3-03A |
DISCO32 Tactical Antennas — Aberdeen, NC
Amplified/Modified by DISCO32 • 1-Year Warranty
